5052 aluminum circle is a round disc cut from 5052 aluminum sheet —
a magnesium-alloyed aluminum containing 2.2–2.8% magnesium. It is
also called 5052 aluminum disc or 5052 aluminum round blank.
Compared to 1100 and 3003 aluminum circle, 5052 offers significantly
higher strength — tensile strength up to 260 MPa in H32 temper —
while maintaining good formability. It delivers the best corrosion
resistance of any common aluminum circle alloy, especially in marine,
saltwater, and chemical environments. It does not crack under forming
and accepts anodizing exceptionally well.
5052 aluminum circle is the preferred choice when strength and
corrosion resistance matter more than maximum formability. It is
widely used for pressure vessels, marine equipment, traffic signs,
chemical processing discs, and structural stamped components.
Key Properties at a Glance:
- Density: 2.68 g/cm³ — lightweight
- Tensile strength (H32 temper): 230–260 MPa — much stronger than
1100 and 3003
- Yield strength (H32 temper): 195 MPa minimum
- Elongation (O temper): 15–25% — good formability
- Corrosion resistance: excellent — best among common circle alloys,
including marine environments
- Thermal conductivity: 138 W/m·K
- Food contact compliant: meets FDA and EU food safety regulations
- Surface: accepts anodizing exceptionally well — widely used for
decorative anodized discs
Chemical Composition of 5052 Aluminum Circle:
| Element | Content |
|---|
| Aluminum (Al) | Balance (~96.7–97.7%) |
| Magnesium (Mg) | 2.2–2.8% |
| Chromium (Cr) | 0.15–0.35% |
| Silicon (Si) | 0.25% maximum |
| Iron (Fe) | 0.40% maximum |
| Copper (Cu) | 0.10% maximum |
| Manganese (Mn) | 0.10% maximum |
| Zinc (Zn) | 0.10% maximum |
| Other elements | 0.15% total maximum |
The magnesium addition (2.2–2.8%) is what defines 5052. Magnesium
provides strong solid-solution hardening — significantly increasing
tensile and yield strength compared to 1100 and 3003. The chromium
addition (0.15–0.35%) further improves corrosion resistance and
controls grain structure. 5052 contains no copper, which makes it
more corrosion-resistant than alloys with copper additions.
Mechanical Properties by Temper:
| Temper | Tensile Strength | Yield Strength | Elongation | Typical Use |
|---|
| O (annealed) | 170–215 MPa | 65 MPa min | 15–25% | Deep drawing, forming, spinning |
| H32 | 230–260 MPa | 195 MPa min | 12% | Pressure vessels, marine parts |
| H34 | 260–285 MPa | 215 MPa min | 10% | Structural discs, traffic signs |
| H36 | 275–305 MPa | 240 MPa min | 8% | Stiff stamped parts |
| H38 | 290 MPa min | 255 MPa min | 6% | Rigid discs, minimal forming |
For forming and deep-drawing applications, O (annealed)
temper is recommended. For structural, marine, and pressure
vessel applications, H32 or H34 is the standard
specification.
5052 Aluminum Sheet Sizes and Thickness Chart:
| Parameter | Range |
|---|
| Thickness | 0.5 mm – 6.0 mm |
| Diameter | 100 mm – 1,500 mm |
| Temper | O, H32, H34, H36, H38 |
| Surface | Mill finish, bright finish, anodized |
| Material | Hot rolled / Cold rolled |
5052 Aluminum Circle Weight Reference:
Weight per disc (kg) = π × (diameter/2)² × thickness × density
Density of 5052 aluminum = 2.68 g/cm³
| Diameter (mm) | Thickness (mm) | Weight per Disc (kg) |
|---|
| 200 | 2.0 | ~0.168 |
| 300 | 2.5 | ~0.474 |
| 400 | 3.0 | ~1.008 |
| 500 | 4.0 | ~2.105 |
| 600 | 5.0 | ~3.789 |
| 800 | 6.0 | ~8.092 |
Send your diameter and thickness to zxaluminum01@gmail.com and we will calculate the exact weight per disc and weight
per tonne for your order.
5052 vs 3003 vs 1100 Aluminum Circle:
Which Should You Order?
The three most common aluminum circle alloys serve different
application needs. Here is a direct comparison:
| Property | 1100 | 3003 | 5052 |
|---|
| Main alloying element | None (pure Al) | Manganese 1.0–1.5% | Magnesium 2.2–2.8% |
| Tensile strength (O temper) | 75–105 MPa | 95–130 MPa | 170–215 MPa |
| Elongation (O temper) | 25–35% | 20–30% | 15–25% |
| Thermal conductivity | 222 W/m·K | 190 W/m·K | 138 W/m·K |
| Corrosion resistance | Excellent | Excellent | Superior — including marine |
| Anodizing quality | Good | Good | Excellent |
| Food contact compliant | Yes | Yes | Yes |
| Price per kg | Slightly higher than 3003 | Standard | Higher than 3003 |
| Best for | Cookware, max formability | Cookware, general fabrication | Marine, pressure vessels, signs |
Choose 5052 when: higher strength is required,
the part will be exposed to marine or chemical environments,
anodized finish quality is critical, or the application involves
pressure vessels and structural components.
Choose 3003 when:
standard cookware production, general fabrication, or
cost-competitive deep-drawn parts are required.
Choose 1100 when:
maximum formability and highest thermal conductivity are the
primary requirements.
5052 Aluminum Circle Price
5052 aluminum circle price is higher than 1100 and 3003 because
magnesium is more expensive than manganese as an alloying addition,
and 5052 requires tighter process control during rolling and annealing.
The price premium is typically 10–20% above 3003 for equivalent
dimensions.
Price depends on four main factors:
- Temper: O temper is the most competitively priced.
H32 and H34 carry a small premium for the additional processing.
- Thickness and diameter: thicker and larger discs
cost more per piece but less per kg at scale.
- Surface finish: mill finish is base price.
Anodized finish carries a premium — but 5052 anodizes better than
any other common circle alloy.
- Order quantity: orders above 5 metric tonnes
receive better pricing. MOQ for custom sizes: 1–3 metric tonnes.
Send your diameter, thickness, temper, surface finish, and quantity
to zxaluminum01@gmail.com and we will reply within
24 hours with pricing and lead time.
Why Order 5052 Aluminum Circle
from Us?
- Direct manufacturer: we produce 5052 aluminum
circles in our own facility — no trading company markup.
- Full size range: thickness 0.5–6.0 mm, diameter
100–1,500 mm, temper O to H38.
- Consistent quality: each batch is tested for
chemical composition, mechanical properties, and dimensional tolerance
before shipment.
- Custom sizes available: non-standard diameters
and thicknesses accepted. MOQ 1–3 metric tonnes for custom
specifications.
- Export experience: we ship to manufacturers in
Southeast Asia, the Middle East, Europe, and South America with full
export documentation.
- Fast response: send your specification and receive
a price quote within 24 hours.
Contact us at zxaluminum01@gmail.com with your diameter, thickness, temper,
and quantity. We will reply within 24 hours.
